|
|
|
|
|
Standard Rail Gauge
|
The US standard
railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an
exceedingly odd number. Why was that gauge used? Because that's the way they
built them in England, and English expatriates built the US Railroads.
Why did the
English build them like that?
Because the
first rail lines were built by the same people who built the pre-railroad
tramways, and that's the gauge they used.
Why did
"they" use that gauge then?
Because the
people who built the tramways used the same jigs and tools that they used for
building wagons, which used that wheel spacing.
Okay! Why did
the wagons have that particular odd wheel spacing?
Well, if they
tried to use any other spacing, the wagon wheels would break on some of the
old, long distance roads in England, because that's the spacing of the wheel
ruts.
So who built
those old rutted roads?
Imperial Rome
built the first long distance roads in Europe (and England) for their legions.
The roads have been used ever since.
And the ruts in
the roads?
Roman war
chariots formed the initial ruts, which everyone else had to match for fear of
destroying their wagon wheels.
Since the
chariots were made for Imperial Rome, they were all alike in the matter of
wheel spacing. The United States standard railroad gauge of 4 feet, 8.5 inches
is derived from the original specifications for an Imperial Roman war chariot.
Bureaucracies
live forever.
So the next time
you are handed a spec and told we have always done it that way and wonder what
horse's ass came up with that, you may be exactly right, because the Imperial
Roman war chariots were made just wide enough to accommodate the back ends of
two war horses.
Now the twist to
the story...
When you see a
Space Shuttle sitting on its launch pad, there are two big booster rockets
attached to the sides of the main fuel tank. These are solid rocket boosters, or
SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who
designed the SRBs would have preferred to make them a bit fatter, but the SRBs
had to be shipped by train from the factory to the launch site. The railroad
line from the factory happens to run through a tunnel in the mountains. The
SRBs had to fit through that 2tunnel. The tunnel is slightly wider than the
railroad track, and the railroad track, as you now know, is about as wide as
two horses' behinds. So, a major Space Shuttle design feature of what is
arguably the world's most advanced transportation system was determined over
two thousand years ago by the width of a horse's ass!